You can download geoid files for use with GeoLab from our Geoid Files page.

Program Setup Files

Important: When you download our setup files, you must always select the Save option when your browser displays its dialog. After the download is complete, you can then run the downloaded setup program.   Program Setup file Purchase Info GeoLab and Explorer MGSetup.exe  (7.8 MB) GeoLab Page Smoother SmootherSetup.exe (806 KB) Smoother Page Surface Area Calculator 2004.9.20 SurfaceAreaSetup.exe (1.3 MB) Surface Area Calculator Page Color Picker ColorPickerSetup.exe (1.1 MB) ColorPicker Page File Format Tools MSFileFmtToolsSetup.exe (1.2 MB) File Format Tools Page

PDF Files

These files are in PDF format and require the Adobe Acrobat Reader. The Acrobat Reader is available freely at Adobe's web site.   PDF File Description GeoLab Field Guide This guide was created for GeoLab users who require a printable manual. GeoLab Brochure A brochure highlighting the main features in GeoLab.

GeoLab Plug-in Files

Our GeoLab plug-ins add file import capabilities to GeoLab's File/Import menu command. For example, if you need to import TDS data into GeoLab, download and install the TDSPluginSetup.exe below. All of our plug-ins are free.   Plug-in Description SINEXImportSetup.exe (520 KB) This import filter (V2008-07-16) has been designed to import a SINEX format file into a GeoLab IOB file. For more information about this plug-in, please see the installed MGIFF_SINEX.htm file. LDDPluginSetup.exe (500 KB) This import filter (V2007-01-11) has been designed to convert Land Development Desktop (LDD) field book files (*.fbk) into a GeoLab IOB file. After installation, please see the MGIFF_LandDevDT.htm file for more information about using this plug-in. GrafNetPluginSetup.exe (490 KB) This import filter (V2006.02.23) has been designed to import a GrafNet EXP file into a GeoLab IOB file. For more information about this plug-in, please see the installed MGIFF_GrafNetEXP.htm file. GpsCsvImportSetup.exe (525 KB) This import filter has been designed to import GPS vectors in CSV format into a GeoLab IOB file. For more information about this plug-in, please see the installed MGIFF_GpsCsvImport.htm file. BernesePluginSetup.exe (504 KB) Updated on May 20, 2005. This import filter has been designed to import ASCII BERNESE 4.2 Coordinate and Covariance Matrix files. After installation, please see the MGIFF_BERNESE42.htm file for more information about using this plug-in. SKIProFilterSetup.exe (491 KB) This import filter has been designed to import ASCII Leica SKI (Pro) GPS data files that use Cartesian coordinates (XYZ). Please note that this filter does not support Grid and Geodetic formats. After installation, please see the MGIFF_LeicaSKI.htm file for more information about using this plug-in. LeicaGSIFilter.exe (991 KB) This import plug-in (V2004-06-09) is designed to import data from the NA (Leveling) line of Leica instruments. Please note that data from WILD instruments can also be imported with this plug-in. After installation, please see the MGIFF_LeicaGSI.htm file for more information about using this plug-in. Coordinate Import (996 KB) This import plug-in (V2004.05.27) is designed to import point coordinates from comma-separated-variable (CSV) text files. After installation, please see the MGIFF_MS_Point_Coordinate.htm file for more information about using this plug-in. ManorImportSetup.exe (1 MB) This import filter has been designed to convert MANOR input files into a GeoLab IOB file. MANOR is an older network adjustment program used in some Canadian provinces. This plug-in must be installed in your GeoLab installation folder. After installation, please see the MGIFF_Manor.htm file for more information about using this plug-in. TDSPluginSetup.exe (0.98 MB) This import filter (V2003-12-04) has been updated. After installation, please see the MGIFF_TDS.htm file for more information about using this plug-in. NikonPluginSetup.exe (0.99 MB) This import filter (V2003-09-13, beta 2) has been designed to convert a Nikon raw data file into a GeoLab IOB file. After installation, please see the MGIFF_Nikon.htm file for more information about using this plug-in. SDRFilterSetup.exe (2.01 MB) This import filter (beta 1) has been designed to convert the most commonly used (conventional traversing) SDR "raw" files into a GeoLab IOB file. This version of the filter does not support leveling or GPS data. After installation, please see the MGIFF_SDRFilter.htm file for more information about using this plug-in. GeodimeterPlugin.exe (0.98 MB) This import filter (beta 2) has been designed to convert a Geodimeter *.job file into into a GeoLab IOB file. After installation, please see the MGIFF_Geodimeter.htm file for more information about using this plug-in. GeoLabPlugins.exe (2.76 MB) This update refreshes several import plug-ins to the latest versions. When you run the installation program (GeoLabPlugins.exe), you must select your current GeoLab installation folder to install this update in. This update contains current versions of the following plug-ins: MGIFF_AshtechOFile MGIFF_BERNESE42 MGIFF_Bluebook MGIFF_LandDevDT MGIFF_LeicaGSI MGIFF_LeicaSKI MGIFF_NGSDataSheet MGIFF_SmiRaw MGIFF_TDS